ULTRA-X20

POWERFUL SOURCE SOLUTION FOR SIZE-CRITICAL APPLICATION
AN EVOLUTION OF TRUSTED TECHNOLOGY
Meyer Sound’s ULTRA-X20 self-powered full-range loudspeaker brings state-of-the-art ULTRA-X40 point source technology to a smaller, lighter footprint, ideal for installed and portable applications where size and weight are critical factors. Whether used as a compact main system or as fills or surrounds in a larger system, count on the ULTRA-X20 to deliver high power output, low distortion, and consistent polar response in any configuration
SMALL AND MIGHTY
The ULTRA-X20 measures just 7.5 inches wide by 19.04 inches high by 8.6 inches deep, but packs a mighty punch, delivering 123.5 dB peak SPL measured using M-Noise. It features two 5-inch cone drivers and a 2-inch compression driver in concentric configuration for more consistent pattern control below the crossover point.
CUSTOMIZABLE COVERAGE
PROVEN AUDIO PROCESSING GETS A NETWORK TRANSFORMATION
READY FOR RIGGING
4 integral M8 rigging points allow a range of configurations including requiring pole mounting, hanging, wall mounting or ceiling mounting—in horizontal or vertical orientation, at any angle. 4 M6 points on the heatsink are compatible with most industry-standard wall mount brackets.

YOU ARE IN THE DRIVER’S SEAT
ULTRA-EFFICIENT AMPLIFICATION
ULTRA-X20 is powered by a three-channel, 860-watt peak Class D digital amplifier with a sophisticated DSP package including electronic crossover, correction filters for phase and frequency response, and driver-protection circuitry. Phase-corrected electronics ensure flat acoustical amplitude and phase response for exceptional impulse response and precise imaging.
INTEL AT YOUR FINGERTIPS
Don’t leave system management to chance: ULTRA-X20 loudspeakers are compatible with Meyer Sound’s RMS platform, which lets you monitor essential performance parameters right from your Mac or Windows PC running Compass control software.
SMART POWER SOLUTIONS
Power up with peace of mind: ULTRA-X20’s built-in IntelligentAC technology auto-selects correct operating voltage, suppresses high voltage transients, filters EMI, and provides soft-start power-up. The ULTRA-X20XP loudspeaker variant incorporates IntelligentDC technology, which receives balanced audio and DC power from a single composite cable—eliminating the need for conduit and allowing for longer, lighter-gauge cable runs.
MAKING ALL THE RIGHT CONNECTIONS
The ULTRA-X20 may be configured with any of three connector panel options. Two AC-powered versions feature looping Powercon connectors with either 3-pin or 5-pin XLR audio I/O and RMS remote monitoring; an IntelligentDC variant receives audio and DC power over single cable via its 5-pin Phoenix connector.